Expanding Stokke® Keep™

Are optional accessories available for my Stokke Keep storage system?

In addition to expanding your Stokke Keep storage system with new separate elements, baskets that will fit under the modules are available and will give you the possibility for even more storage capasity and mixing and matching with colours.

I have recently redecorated and wonder if I can personalize my Stokke Keep storage system?

The Stokke Keep storage system, is part of our nursery product range which also includes Stokke Sleepi, and Stokke Care. Stokke Keep is available in a wide range of colours designed to help you create, match, or compliment the colour scheme of your nursery. However, as your interior colour scheme changes over time you may wish to personalize and add new life to your storage system with fresh tones and hues.

Whilst personalizing your Stokke wooden product is a simple no fuss task, we do recommend following this useful twelve step guide to help you and your child to continue to get the most out of your Stokke Keep storage system.

1. Loosen and remove all screws to dissemble your product. Following your product´s assembly instructions in reverse will help you remove each part in a safe and consistent manner.
2. Wash each part separately and thoroughly, taking care to remove all grease and other residues using a neutral to alkaline non detergent soap. We recommend a fluid rather than powder based soap to avoid scouring, scratching, or other abrasions to your chair’s surface.
3. Allow each part to dry.
4. Remove labels carefully so that you may reattach these later.
5. Sandpaper the surface of each wooden part lightly to remove the protective lacquer coating using grade 220 paper. Do not sand or otherwise attempt to grind any painted or non painted screws or other metallic parts.
6. Use a dry cloth to remove all dust and sandpaper deposits.
7. Apply a thin first but even coat to each wooden part using a reputable and well known water based paint. Ensure that all slates and grooves are lightly covered.
8. Allow each part to dry.
9. Apply the final thin but even coat to each wooden part.
10. Allow each part to dry.
11. Reassemble your product by following the assembly instructions to ensure you assemble it in the correct manner.
12. Replace the warning label.