Expanding Stokke® Keep™

Are optional accessories available for my Stokke Keep storage system?

In addition to expanding your Stokke Keep storage system with new separate elements, baskets that will fit under the modules are available that will give you the possibility of even more storage capacity and mixing and matching of colors.

I have recently redecorated and wonder if I am able to personalize my Stokke Keep storage system?

The Stokke Keep storage system is part of our nursery product range which also includes Stokke Sleepi and Stokke Care. Stokke Keep is available in a wide range of colors designed to help you create, match or complement the color scheme of your nursery. However, as your interior color scheme changes over time, you may wish to personalize and add new life to your chair with fresh tones and hues.

Whilst personalizing your Stokke wooden product is a simple no fuss task, we do recommend following this useful twelve-step guide to help you and your child continue to get the most out of your Stokke Keep storage system.

1. Loosen and remove all screws to disassemble your product. Following your product´s assembly instructions in reverse will help you remove each part in a safe and consistent manner.
2. Wash each part separately and thoroughly, making sure to remove all grease and other residues using a neutral to alkaline non-detergent soap. We recommend a fluid rather than a powder-based soap to avoid scraping, scratching or any other abrasions to your chair’s surface.

3. Allow each part to dry.
4. Remove labels carefully so that you may reattach them later.
5. Sandpaper the surface of each wooden part lightly to remove the protective lacquer coating using 220 grade paper. Do not sand or otherwise attempt to grind any painted or non-painted screws or other metallic parts.
6. Use a dry cloth to remove all dust and sandpaper deposits.
7. Apply a thin first, but even, coat to each wooden part using a reputable and well-known water-based paint. Ensure that all slats and grooves are lightly covered.
8. Allow each part to dry.
9. Apply the final thin, but even, coat to each wooden part.
10. Allow each part to dry.
11. Reassemble your product by following the assembly instructions to ensure you assemble it in the correct manner.
12. Replace the warning label.