Expanding Stokke® Sleepi™

Are optional accessories available for my Stokke Sleepi crib?

Stokke Sleepi comes with a wide range of bedding textiles so that you can mix and match colors and patterns. The accesories section gives you an overview of the many options available to you.

I have recently redecorated and wonder if I am able to personalize my Stokke Sleepi crib?

The Stokke Sleepi crib is part of our nursery product line which also includes Stokke Care and Stokke Keep. Stokke Sleepi is available in a wide range of colors designed to help you create, match or complement the color scheme of your nursery. However, as your interior color scheme changes over time, you may wish to personalize and add new life to your crib with fresh tones and hues.

While personalizing your Stokke wooden product is a simple, hassle-free task, we do recommend following this useful twelve-step guide to help you and your child continue to get the most out of your Stokke Sleepi crib.

1. Loosen and remove all screws to disassemble your product. Following your product´s assembly instructions in reverse will help you remove each part in a safe and consistent manner.
2. Wash each part separately and thoroughly, making sure to remove all grease and other residues using a neutral to alkaline non-detergent soap. We recommend a fluid rather than a powder-based soap to avoid scraping, scratching or any other abrasions to your chair’s surface.

3. Allow each part to dry.
4. Remove labels carefully so that you may reattach these later.
5. Sandpaper the surface of each wooden part lightly to remove the protective lacquer coating using 220 grade paper. Do not sand or otherwise attempt to grind any painted or non-painted screws or other metallic parts.
6. Use a dry cloth to remove all dust and sandpaper deposits.
7. Apply a thin first, but even, coat to each wooden part using a reputable and well-known water-based paint. Ensure that all slats and grooves are lightly covered.
8. Allow each part to dry.
9. Apply the final thin, but even, coat to each wooden part.
10. Allow each part to dry.
11. Reassemble your product by following the assembly instructions to ensure you assemble it in the correct manner.
12. Replace the warning label.